The MikroTik Audience is a Wi-Fi access point with Tri-band Mesh Networking. Find out more in this MikroTik Audience review.
A tri-band mesh network for fast transmission MikroTik Audience is more than just a WiFi router: first, it provides a tri-band mesh network, which makes it a great solution for large rooms, and second, it looks There is no ugly and with a few LEDs.
Check out the MikroTik Audience evaluation by Android Authority to find out if this is the best router for you. The internet. It contains three radios, one in the 2.4 GHz band and two in the 5 GHz band. The second 5 GHz is dedicated to audience-to-viewer communication in a mesh configuration. The 2.4 GHz radio supports 802.11b/g/n (that is, WiFi 4), and the 5 GHz system supports WiFi 5 (i.802.11a/n/ac).
The audience is running RouterOS, a dedicated MikroTik operating system that is common to all wireless routers. There are also mobile apps for Android and iOS. In a mesh network configuration, you can add additional audience units to create a single Wi-Fi network in a large area. ., Press the button to pair a new device that’s the use? The theoretical speed of the MikroTik Audience is good.
The maximum data rate in the 2.4 GHz band is 300Mbps, which is the same as other WiFi-4 routers. The 5 GHz radio can handle up to 867 Mbit/s, and the second-highest speed is 1733 Mbit/s. That is only 2.9 Gbit/s. Thanks to the dual-band radio, you can use both 2.4 GHz and 5 GHz bands at the same time. Simultaneously. You can connect your tablet to the 2.4 GHz end, then connect your computer or smart TV to a 5 GHz radio and use both at the same time without reducing bandwidth. The theoretical speed is of course the theoretical speed. I checked my hearing on the local network. This means that I don’t have to rely on the whims of an Internet connection, and the tests are repeatable and repeatable.
When connected to the audience unit over a short distance above 5 GHz, the peak throughput is 383 Mbit/s. As with all Wi-Fi systems, when I move to other rooms in the house, the size decreases. The size of the slope depends on the distance, the thickness of the walls of the house, the materials used to construct the walls, etc. At the bottom of the auditorium, you will find two Gigabit Ethernet ports and a power connection.
The first Ethernet port on the main device is used to connect to the Internet router. The first port also supports Power over Ethernet (PoE), which means you can reduce the number of cables in the device and provide power and Ethernet through the same cable. Suitable for users who need to extend the range of Wi-Fi networks. In a mesh network, multiple nodes communicate with each other and find a path back to the first device and the Internet.
It is meshed rather than linked, which means that the shortest path will return to the main block. Path The disadvantage of a simple WiFi repeater is that it can only be used with a radio. You need to listen to the same broadcast as the broadcast. This halved the potential bandwidth from the start. The auditorium is a three-band system where one frequency band is used for walkie-talkies, usually called t.
This means that the other two radios can communicate freely with their devices without sacrificing the overall bandwidth to send data. …To another node. Adding a new audience to the grid is easy: just click the button on the main audience, then click the button on the added group. Wait a few minutes. And all! The network uses the same SSID and password. The configuration network is sent between nodes on the return flight. If you change the WiFi password on the main site, all other sites will automatically sync to use the new password. Work, your device will automatically switch to the side with the strongest signal.
Regardless of the type of device used (Android, iOS, Windows laptop, etc.), the changes will be made automatically. Stay connected to further nodes until you can no longer switch. Ultimately, it all depends on the device. The most surprising thing about Audience Unit Mesh is the increase in speed because the third lane is like a return flight. For example, in my home, it is connected to the main audience area (we call it audience 1). ) The bandwidth from another room is 248 Mbit/s. If you add another node to the network and place it in the same room (let’s call it Audience 2).